Shijiazhuang Huaneng Electric Power Fitting Co. Ltd. is a new company with abilities of R&D, manufacture and trade. The company locates in No.189, Hengshan Street, Shijiazhuang High-tech Development Zone, Hebei Province, China, covering the area 26,593 square meters.
Shijiazhuang Huaneng Electric Power Fitting Co. Ltd. specially manufactures preformed helical fittings which are widely used in transmission line. Currently our company owns the big ability to produce lots of varied preformed helical fitting in one year, among them OPGW and ADSS fittings for optical cables, together with fittings for conductor line and earth-wire line which is developed recently passed the tests in the national Electric Power Construction Research Institute and Shanghai Electric Cable Research Institute, and passed identification of the expert group of Hebei Economic and Trade committee. Our company was named as a high-tech enterprise by Hebei Science and Technique Bureau.
From the beginning of establishment, we pay more attention to the quality of products, strengthened the quality conception of employees, and build up a perfect quality-control system, so we have passed the qualification of ISO 9001:2008 international quality system identification. In our company there are enough experts and advanced equipments for production and examinations, Our products have been sold to many localities in nation and overseas, and been used in lines of different voltage degree. Suffering the rigorous test in every kind of weather conditional, our products still work very well without any trouble occurrence.
In order to offer the customer a exact and effective plan of reduce-vibration , Our company established a vibration-laboratory with the help of transmission line experts and the vibrate experts of the national power company. We can test the power characteristic and tired function of vibration damper, and test it’s reduce-vibration valuation in the the OPGW and ADSS optical cables, consequently providing a scientific trial basis for design of reduce-vibration in the projects.
Our quality guideline: Regarding customer as our focus with attention, persisting in innovating in techniques, strengthening and perfecting quality-control system, providing the high-tech product for electric power developments.
Our quantity target: The eligibility rate in products amounts to 100%; The customer approval attains 95%.
Welcome each expert to visit our company and supervise our works.
Tel: +86 311 8596 3888 8356
FAX: +86 311 8596 3666
Address: No.189, Hengshan Street, Shijiazhuang High-tech Development Zone, Hebei Province, China
Postcode: 050035
E- mail: huanengfitting.carol@gmail.com
Main applications For Fittings for OPGW and ADSS
1. Characteristics
Screw is the main characteristic of hardware applications for OPGW and ADSS. The structural reinforcing rods and dead end have large holding area, the stress are well-proportioned. The whole unit is gently, so the vibration can be minimized, and the optical fiber cable can be protected very well. Easily applied on installation, and no specific tolls required for installation.
2. Suspension for OPGW and ADSS
It applies on the pole where line angle no exceeding than 25°for OPGW and ADSS. The unit does use a combination of structural reinforcing rods, outer rods, housing and resilient cable inserts to reduce compression clamping and bending stress on the cable and glass fibers. Negative effects of wind induced cable motions such as aeolian vibration, galloping and wind sway are also minimized. Its holding strength is 10%-20% of the cable’s UTS.
3. Dead-ends for OPGW and ADSS
It applies on terminal pole and long span pole where line angle is exceeding 25°for OPGW and ADSS. The double layer of rods transfer axial tensile forces and distribute radial compressive forces into the dead-end component ensuring maximum holding strength without causing cable jacket damage of fiber attenuation. Its holing strength is over 95% of the cables ultimate tension strain. (UTS)
Main applications For conductor fittings:
1. Performed guy grip
2. Splice rods
3. Repair rods
4. Armor rods
5. Spiral vibration damper
Contact Information:
https://www.huanengfitting.com
E-mail: huanengfitting@163.com
Tel.: +86 311 8596 0188
Fax: +86 311 8596 3666
Mod.: +86 136 3082 3632
WeChat: +86 136 3082 3632
Skype: carol8501
Whatsapp: +8613630823632
Address: NO.189, Hengshan Street, Shijiazhuang, High-tech Zone, Hebei Province, China.
Sign In